对于城市各类建筑来说，山东通风管道工程起着至关重要的作用，通风管道的质量将直接影响到整个工程质量。今天通风管道厂家为大家介绍更好的控制通风管道安装质量的方法。
For all kinds of buildings in cities, Shandong ventilation pipeline project plays a crucial role, and the quality of ventilation pipeline will directly affect the quality of the whole project. Today, the ventilation pipe manufacturer introduces the better control method of the installation quality of the ventilation pipe.
山东通风管道
Shandong ventilation pipeline
一、施工前的准备工作
1、 Preparation before construction
充分的准备工作是确保风管安装质量的前提。
Adequate preparation is the premise to ensure the installation quality of air duct.
在准备净化风管的制作时，无论是采取工厂集中制作还是现场制作方式，都必须保证场地的洁净和封闭。
When preparing the production of the purification air duct, whether it is centralized production in the factory or on-site production, the site must be clean and closed.
拥有符合条件的采光和照明条件。
Have qualified lighting and lighting conditions.
除此外，还要对制作好的方管进行管理，避免管道被污染。
In addition, we should also manage the square pipes to avoid the pipeline being polluted.
二、风管的横向连接
2、 Transverse connection of air duct
风管的横向连接是延续风管长度的一种手段，还具备增强刚度及保持风管精确地横向尺寸的作用。
The transverse connection of the duct is a means to continue the length of the duct, and also has the function of enhancing the rigidity and keeping the wind duct accurately in the transverse dimension.
通常横向连接的方式是角钢法兰连接，这种连接方式取决于壁厚，更取决于连接种类及板壁加固方式。
Generally, the transverse connection is angle steel flange connection, which depends on the wall thickness, and more depends on the type of connection and the reinforcement of the plate wall.
三、风管材质的选择
3、 Selection of duct material
为了保证风管的重量，需采用小板厚的风管，但除此外还需要综合考虑风管的尺寸和压力级别。
In order to ensure the weight of the duct, the small plate thick air duct is required, but in addition, the size and pressure level of the duct should be considered comprehensively.
从设计角度来看，一个系统可以同时存在几种对应于不同静压级别的风管板厚。
From the design point of view, there are several types of duct plate thickness corresponding to different static pressure levels simultaneously in a system.
四、风管的纵向缝接合
4、 Longitudinal joint of air duct
风管的纵向缝接合方式可以根据实际情况，选择对应的方式。
The longitudinal joint mode of air duct can be selected according to the actual situation.
在中、低压风管中常常使用扣式咬口连接，对于矩形风管，联合咬口使用无任何压力级别。
Buckle type is often used in medium and low pressure air ducts. For rectangular air ducts, joint bite is not used for any pressure level.
对于立缝和封盖式立缝可以使用铆钉、自攻螺丝、点焊、压凸凹痕等方法紧固。
For vertical joint and cover type vertical joint, rivets, tapping screws, spot welding, indenting and other methods can be used to fasten.
五、风管的存放
5、 Storage of air ducts
预制好的风管，是必须要做好存放工作，以免受到二次污染。
The prefabricated air duct must be stored well to avoid secondary pollution.
可将管口用塑料布等密封材料封住，然后将风管分门别类堆放好。
The pipe mouth can be sealed with plastic cloth and other sealing materials, and then the air duct can be piled up in different categories.
在使用风管前，要注意进行的清洗工作，确定板材表面无腐蚀，干燥后不吸尘。
Before using the air duct, pay attention to the cleaning work to ensure that the surface of the plate is free of corrosion and no dust after drying.
山东通风管道
Shandong ventilation pipeline
因此，严格把控好山东通风管道的安装质量是非常重要的。通风管道现在应用在各个领域，受到广大群众的欢迎与喜爱，想要了解更多咨询，欢迎持续关注我们的信息。
Therefore, it is very important to control the installation quality of ventilation pipes in Shandong Province. Ventilation ducts are now used in various fields, and are welcomed and loved by the masses. For more consultation, we welcome to pay close attention to our information. 上一篇：通风管道设计结合实际的原因!
下一篇：济南通风管道的通风原则分为几类？