镀锌风管通风管道怎么进行清洗工作？
How to clean the galvanized air duct and ventilation duct?
1.先用纸巾盖住通风管道送风装置（向房间供热的开口）。
1. Cover the ventilation duct and air supply device (the opening for heating the room) with a paper towel first.
您这样做是为了防止工作时排出的灰尘飘入房间。只需提起收纸器，将纸巾包裹在纸巾的顶部，然后更换它。
You do this to prevent the dust discharged during work from floating into the room. Just lift the paper receiver, wrap the paper towel on the top of the paper towel, and then replace it.
2.打开风扇，以使灰尘随着撞击和刷扫而松动。
2. Turn on the fan to make the dust loose with impact and brushing.
将恒温器设置为“风扇打开”，并关闭“加热/冷却”模式，以便仅风扇在运行。如果您没有仅使用风扇的选件，则可以进行加热，也可以借此机会使用此有用的选件安装更新的恒温器。
Set the thermostat to "fan on" and turn off "heating / cooling" mode so that only the fan is running. If you do not have a fan only option, you can heat it or take this opportunity to use this useful option to install an updated thermostat.
3.检查通风管道过滤器，确保旧的炉子过滤器就位，以免敲打下来的灰尘不会被吸入风扇电动机中。
3. Check the ventilation duct filter to ensure that the old furnace filter is in place, so that the dust knocked down will not be sucked into the fan motor.
松开管道中的灰尘。敲除管道中积聚的灰尘。只需握住刷子的手柄，然后开始敲打地下室中任何可用的风管工作。这将有助于解决可能粘附在管道内部的任何潮湿灰尘沉积物。
Loosen the dust in the pipe. Knock out the dust accumulated in the pipe. Just hold the handle of the brush and start tapping any available air duct in the basement. This will help resolve any wet dust deposits that may adhere to the inside of the pipe.
The above is the detailed introduction of Shandong cable tray, which I hope will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.sdhangfeng.com
上一篇：提高排烟管道质量的方法有哪些？
下一篇：哪几个方面可以危害到通风管道的安裝品质
