不锈钢焊接风阀厂即将详细介绍一些新的知识，进而让大伙儿对不锈钢风管的了解可以更加深入一步，下边关键解读的是不锈钢钢管的焊接类型。不锈钢风管的焊接，常见的方式 有手工制作焊，通称MMA，也有金属材料极气体保护焊和钨极惰性气体保护焊，金属材料极气体保护焊通称MIG/MAG，钨极惰性气体保护焊通称TIG。
Stainless steel welding air valve factory will introduce some new professional knowledge in detail, so that everyone can have a deeper understanding of stainless steel air duct. The next key interpretation is the welding type of stainless steel pipe. The common welding methods of stainless steel air duct are manual welding, commonly known as MMA, metal material electrode gas shielded welding and tungsten inert gas shielded welding. Metal material electrode gas shielded welding is commonly known as MIG / MAG, and tungsten inert gas shielded welding is commonly known as TIG.
方式 一：不锈钢螺旋风管厂手工制作焊应用十分广泛，且实际操作非常容易，主要是靠人开展调整，焊接添充原材料为不锈钢焊条。手工制作焊基本上能焊接全部的原材料，即便在户外也可以，因而它具备非常好的适应能力，一般焊接时是选用直流电源。不锈钢焊条，既能够 是钛型焊丝，也可以是缄性的。钛型焊丝较为非常容易焊接，焊接美观大方，且焊穿非常容易除去。但缺陷是假如长期无需后再应用，那麼务必再次开展烤制，防止湿气堆积。
Method 1: the manual welding of stainless steel spiral air duct factory is widely used, and the actual operation is very easy. It is mainly adjusted by people. The raw material for welding is stainless steel electrode. Manual welding can basically weld all raw materials, even outdoors, so it has very good adaptability. Generally, DC power supply is selected for welding. Stainless steel electrode can be either titanium type welding wire or sealed. Titanium type welding wire is very easy to weld, the welding is beautiful and generous, and the welding penetration is very easy to remove. However, the defect is that if it is not needed for a long time, it must be baked again to prevent moisture accumulation.
方式 二：金属材料极气体保护焊它归属于气体保护焊，也是一种电弧焊接，是在维护气体下，焊丝被电孤溶化。金属材料极气体保护焊可用以钢、非碳素钢、高合金钢及其高铝合金等这种原材料，应用很普遍。但有一点，它的维护气体务必为特异性气体，例如二氧化碳或是混和气体等。
Mode 2: metal material electrode gas shielded welding, which belongs to gas shielded welding and is also an arc welding. The welding wire is melted by electric arc under the maintenance gas. Metal material electrode gas shielded welding can be used as raw materials such as steel, non carbon steel, high alloy steel and its high aluminum alloy. However, its maintenance gas must be specific gas, such as carbon dioxide or mixed gas.
的缺陷是假如在户外开展焊接，那麼产品工件不可以返潮，不然会危害维护气体的维护实际效果。方式 三：钨极惰性气体保护焊电孤是在钨电弧焊接丝和产品工件中间造成，因此 规定维护气体为纯氩气，且焊条不是感应起电的，因此 既能够 手动式送进，也可以设备送进，有时候也可以不送进。随后它到底是应用直流电源還是交流电流，则在于焊接原材料。钨极惰性气体保护焊主要是用以焊接薄和中等水平薄厚的产品工件，材料的范畴很广，包含碳素钢、铝、镁、铜、灰铸铁、镍、银、钛及其铅等。
The defect is that if welding is carried out outdoors, the product workpiece cannot return to moisture, otherwise it will endanger the actual maintenance effect of maintenance gas. Mode 3: tungsten inert gas shielded arc welding arc is caused between the tungsten arc welding wire and the product workpiece. Therefore, it is specified that the maintenance gas is pure argon and the electrode is not inductively energized. Therefore, it can be sent manually, equipment or not. Then, whether it applies DC power supply or AC current depends on the welding raw materials. Tungsten inert gas shielded welding is mainly used to weld thin and medium thin and thick product workpieces. There are a wide range of materials, including carbon steel, aluminum, magnesium, copper, gray cast iron, nickel, silver, titanium and lead.
The above is Shandong ventilation duct http://www.jntfgd.com Thank you for checking the information of our company in your busy schedule. If you want to know more, you are welcome to call for consultation!
上一篇：铺设通风管道时对周围环境的要求!
下一篇：不锈钢螺旋风管的加工难点要注意什么？
