通风管道的应用能够促使杰出的通风，推动室内的空气流转，操纵气流的速度减轻窒息感，什么叫做通风，也便是将室内或是是密闭里的污秽的空气排掉，在工厂里将形成的有害物质都历经净化解决今后都排出来野外，随后再将新鲜空气送进室内，稀释液空气的有害物质，考虑人们对于空气的要求。
The application of ventilation ducts can promote excellent ventilation, promote indoor air circulation, and control the speed of air flow to reduce the suffocation feeling. What is called ventilation is to exhaust the dirty air in the room or in the closed room. The harmful substances formed in the factory will be discharged out of the field after purification, and then fresh air will be sent into the room. For the harmful substances in the dilution air, consider people's requirements for air.
假如条件略微好一点库房能够挑选装置
山东通风管道，不仅能够解决问题，还能更好的改善库房环境，更利于物资的存放。也能够挑选装置换气扇或许装置通风电风机，但需注意，通风口装的风机好在下班的时分关掉，假如长期滚动，转轴过热起火会引起火灾，造成库房重大事故。
If the conditions are slightly better, the warehouse can select the ventilation pipeline in Shandong, which can not only solve the problem, but also better improve the warehouse environment and facilitate the storage of materials. You can also choose to install a ventilator or an electric fan for ventilation, but it should be noted that the fan installed at the vent should be turned off at the time of work. If it is rolled for a long time, the shaft will overheat and catch fire, which will cause a major accident in the warehouse.
常用的塑料通风管道是用硬聚氯乙烯塑料板加工而成，因为它具有较好的化学稳定性，常用来运送有腐蚀性的气体。硬聚氯乙烯风管及附件进行加工时，与金属板风管在展开划线方面是相同的，其他方面有很大的不同。
The commonly used plastic ventilation pipe is made of UPVC plastic sheet, because it has good chemical stability, and is often used to transport corrosive gases. Unplasticized polyvinyl chloride air duct and accessories are processed in the same way as metal sheet air duct in the aspect of developing and scribing, but there are great differences in other aspects.
通风管道装置结束以后，板与板的衔接选用热风塑料焊接，风管的纵缝应交锗设置，圆形风管可在组配焊接时考虑。
After the completion of the ventilation duct installation, the connection between the plate and the plate shall be welded with hot-air plastic. The longitudinal seam of the air duct shall be set with germanium. The round air duct can be considered during assembly and welding.
此外通风管道加工设备的原料要选不锈钢原料，这样的话能够使设备的运用周期进步，清洗便利简略，有利于作业的快速进行，重要的一点就是设备的风量，转速，等技术参数要到达整个工程的运用要求和规则。
In addition, the raw material of the ventilation pipe processing equipment should be stainless steel. In this way, the use cycle of the equipment can be improved, and the cleaning is convenient and simple, which is conducive to the rapid operation. The important point is that the technical parameters of the equipment such as air volume, rotating speed, etc. should meet the application requirements and rules of the whole project.
Now, ventilation ducts are widely used in buildings, making indoor air more smooth. Of course, if you need it, welcome to our website http://www.jntfgd.com Consult and understand!
上一篇：设计酒店厨房排烟罩时要考虑到什么？
下一篇：风管及管道部件设计中常用的计算方法
