通风管道在许多修建物里面都是不可短少的通风资料，假设咱们发现这些通风管道有损害，没需求当即开端替换，因为有的破损状况是通风管道加工能够采纳适宜的办法进行修复的。下面
山东通风管道厂家为您解答。
Ventilation ducts are indispensable ventilation data in many buildings. If we find that these ventilation ducts are damaged, we do not need to replace them immediately, because some damaged conditions can be repaired by adopting appropriate methods during the processing of ventilation ducts. Next, Shandong ventilation pipe manufacturer will answer for you.
假设通风管道外层仅稍稍的破损，可用专用的密封胶带来修补。假设是表里表有细微破损，可用专用修补胶来修补。假设外外表铝箔层破损，但玻纤保温层没有被损坏，可用一片质量较好的铝箔片来修补。
Assuming that the outer layer of the ventilation pipe is only slightly damaged, special sealant can be used to repair it. It is assumed that there is slight damage on the inside and outside of the meter, which can be repaired with special repair glue. Assuming that the aluminum foil layer on the outer surface is damaged, but the glass fiber insulation layer is not damaged, a piece of aluminum foil with good quality can be used to repair.
假设通风管道壁的破损已触及到玻纤保温层，可将破损处切开下来，开出男女搭接口，再挑块无缺的板材，依据切开下来的玻板规范切开好，留下男女搭接口，在四周接口上涂上修补胶和粘胶剂，然后做好密封。
Assuming that the damage of the ventilation pipe wall has touched the glass fiber insulation layer, the damaged part can be cut off, the male and female joints can be made, and then the intact plate can be picked up. According to the specifications of the glass plate cut off, the male and female joints can be cut off, and the male and female joints can be left. The repair glue and adhesive can be applied on the surrounding interfaces, and then the sealing can be done.
但是万一真的损坏非常严峻，根柢无法持续运用就要将其报废了。因为即便暂时康复好了，持续运用功用性会不抱负，还会在往后再次损坏。
But in case of serious damage, it will be scrapped if it cannot be used continuously. Because even if he recovers temporarily, he will not be ambitious if he continues to use the function, and will be damaged again in the future.
在通风管道设备时发现破损已到达玻纤保温层时，则可将破损的当地切开下来，另选一块无缺的板材，根据切开下来的玻板标准切开好，然后在周围接口上涂上修补胶及粘胶剂，根据工艺标准中止密封，在通风设备正常作业时就要常常查看防止耽误作业。只需正常运转的通风设备才会为人类效能，这就恳求要及时查看设备能否破损。
When it is found that the damage has reached the glass fiber insulation layer in the ventilation duct equipment, the damaged area can be cut down, another intact plate can be selected, cut according to the cut glass plate standard, and then apply repair glue and adhesive on the surrounding interface. Stop sealing according to the process standard. When the ventilation equipment is operating normally, it is necessary to check frequently to prevent delay in operation. Only the ventilation equipment in normal operation can be effective for human beings, so it is requested to check whether the equipment can be damaged in time.
只有正常运行的通风设备才能为人类服务，这就要求要及时检查设备是否破损，并且及时更换补救，以保证整个通风进程可以正常工作。
Only normal ventilation equipment can serve human beings, which requires timely inspection of whether the equipment is damaged, and timely replacement and remediation to ensure that the entire ventilation process can work normally.
This is all about how to process and repair damaged ventilation pipes. I hope it will help you! If you have any needs or questions, you can come to our website at any time http://www.jntfgd.com Consult!
上一篇：净化空调系统通风管道的制作有一定的环境要求
下一篇：通风管道的机械通风标准怎样？
