1)对于比较复杂的民用建筑，在设计阶段，各工种(暖通、给水排水，供电照明与建筑专业)首先应协商好空间分隔，定出每种管道的标高范围。一般情况下不得越出给自己规定的界限。遇有个别管段要越界时应与通风管道其他工程协商。

1) For complex civil buildings, during the design phase, each profession (HVAC, water supply and drainage, power supply and lighting, and architecture) should first negotiate spatial separation and determine the elevation range of each type of pipeline. Under normal circumstances, one should not exceed the limits set for oneself. When there is a section of the pipeline that needs to cross the boundary, it should be negotiated with other ventilation pipeline projects.

2)解决各种通风管道相碰及协调的原则，一般为:"小管让大管，有压让无压"。例如，自来水管与风管相撞，则应当自来水管拐弯。冷、热水管与下水管相碰，则应改变冷、热水管道。空调通风管道系统清洗基本流程如下：

2) The principle for solving the collision and coordination of various ventilation ducts is generally: "Small pipes give way to large pipes, and pressure gives way to no pressure.". For example, if the water pipe collides with the air pipe, the water pipe should be turned. If the cold and hot water pipes collide with the drainage pipe, the cold and hot water pipes should be changed. The basic process for cleaning the air conditioning ventilation duct system is as follows:

1、对室内空气进行抽样检测：中央空调清洗抽取室内的空气进行分析，确定空气质量。

1. Sampling and testing of indoor air: Central air conditioning cleaning extracts indoor air for analysis to determine air quality.

2、对风管内空气进行取样：用检测机器人在风管内取样进行分析，确定污染程度。

2. Sampling the air inside the air duct: Use a detection robot to sample and analyze the air inside the duct to determine the degree of pollution.

3、为顾客提供空气污染分析报告：送风中是否有明显微生物，通风系统是否有可见尘粒进入室内。

3. Provide customers with air pollution analysis reports: whether there are obvious microorganisms in the air supply, and whether there are visible dust particles entering the indoor ventilation system.

4、制订风管清洗方案：分析通风管道的结构，根据顾客要求制订详细的方案。

4. Develop a duct cleaning plan: Analyze the structure of the ventilation ducts and develop a detailed plan based on customer requirements.

5、签定中央空调清洗合同：中央空调清洗剂根据分析报告和清洗方案，与顾客协商清洗价格并签定合同。

5. Sign the Central Air Conditioning Cleaning Contract: Based on the analysis report and cleaning plan, negotiate the cleaning price with customers and sign the contract for the central air conditioning cleaning agent.

6、施工的准备工作：将所有需用到的清洗设备和工程人员进驻现场。

6. Preparation work for construction: Move all necessary cleaning equipment and engineering personnel to the site.

7、现场操作：济南厨房排烟罩小编发现用清洗机器人进行作业，使用大功率的专用管道吸尘器收集管道内的污染物。

7. On site operation: The Jinan kitchen smoke exhaust hood editor found that cleaning robots were used for operations, and high-power specialized pipeline vacuum cleaners were used to collect pollutants inside the pipelines.

8、消毒：先对管道进行物理消毒，再用紫外线进行处理，避免二次的污染。

8. Disinfection: First, physically disinfect the pipeline, and then treat it with ultraviolet radiation to avoid secondary pollution.

9、清洗效果检验：用目测法和称重法检验清洗效果。

9. Cleaning effect inspection: Check the cleaning effect using visual inspection and weighing methods.

10、清洗后的分析报告：空调清洗剂清洗完成后再为顾客提供一份分析报告，各项数值与清洗前做对比。

10. Analysis report after cleaning: After the air conditioning cleaning agent is cleaned, provide customers with an analysis report, comparing the various values with before cleaning.

11、验收：按《空调通风系统清洗规范》标准进行检验，确保工程质量达标。

11. Acceptance: Conduct inspection according to the "Code for Cleaning of Air Conditioning and Ventilation Systems" to ensure that the project quality meets the standard.

12、现场恢复：将拆卸的风口重新安装，调整好出风量。

12. On site recovery: Reinstall the dismantled air vent and adjust the air outlet.

感谢您的阅读，此文的文章来源：山东通风管道更多的内容和问题请点击：http://www.jntfgd.com们会继续努力的为您提供服务，感谢您的支持！

Thank you for reading. The source of this article is Shandong Ventilation Pipeline. For more information and questions, please click: http://www.jntfgd.com We will continue to work hard to provide you with services. Thank you for your support!